b40c1000g, b80c1000g, b125c 1000g, b250c1000g, b380c1000g www.vishay.com vishay semiconductors revision: 08-jul-13 1 document number: 88500 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 glass passivated single-p hase bridge rectifier features ? ideal for printed circuit boards ? high case dielectric strength ? high surge current capability ? typical i r less than 0.1 a ? solder dip 275 c max. 10 s, per jesd 22-b106 ? material categorization: for definitions of compliance please see www.vishay.com/doc?99912 typical applications general purpose use in ac/dc bridge full wave rectification for power supply, adapter, char ger, lighting ballaster on consumers, and home appliances applications. mechanical data case: wog ? molding compound meets ul 94 v-0 flammability rating base p/n-e4 - rohs-co mpliant, commercial grade terminals: silver plated leads, solderable per j-std-002 and jesd22-b102 polarity: as marked on body primary characteristics package wog i f(av) 1.0 a v rrm 65 v, 125 v, 200 v, 400 v, 600 v i fsm 45 a i r 10 a v f at i f = 1.0 a 1.0 v t j max. 125 c diode variations quad case style wog + ? ~ ~ + ? ~ ~ e4 maximum ratings (t a = 25 c unless otherwise noted) parameter symbol b40 c1000g b80 c1000g b125 c1000g b250 c1000g b380 c1000g unit maximum repetitive pe ak reverse voltage v rrm 65 125 200 400 600 v maximum rms input voltage r- and c-load v rms 40 80 125 250 380 v maximum dc blocking voltage v dc 65 125 200 400 600 v maximum peak working voltage v rwm 90 180 300 600 800 v maximum non-repetiti ve peak voltage v rsm 100 200 350 600 1000 v maximum repetiti ve peak forward surge current i frm 10 a maximum average forward output current for free air operation at t a = 45 c r- and l-load i f(av) 1.2 a c-load 1.0 peak forward surge current single sine-wave on rated load i fsm 45 a rating for fusing at t j = 125 c (t < 8.3 ms) i 2 t 10 a 2 s minimum series resistor c-load at v rms = 10 % r t 1.0 2.0 4.0 8.0 12 ? maximum load capacitance + 50 % ? - 10 % c l 5000 2500 1000 500 200 f operating junction temperature range t j - 40 to + 125 c storage temperature range t stg - 40 to + 150 c electrical characteristics (t a = 25 c unless otherwise noted) parameter test conditions symbol b40 c1000g b80 c1000g b125 c1000g b250 c1000g b380 c1000g unit maximum instantaneous forward voltage drop per diode 1.0 a v f 1.0 v maximum reverse current at rated repetitive peak voltage per diode t a = 25 c i r 10 a
b40c1000g, b80c1000g, b125c 1000g, b250c1000g, b380c1000g www.vishay.com vishay semiconductors revision: 08-jul-13 2 document number: 88500 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 note (1) thermal resistance from j unction to ambient and from junction to lead mounted on pcb at 0.375" (9.5 mm) lead lengths with 0.22" x 0.22" (5.5 mm x 5.5 mm) copper pads ratings and characteristics curves (t a = 25 c unless otherwise noted) fig. 1 - derating curves output rectified current for b40c1000g...b125c1000g fig. 2 - derating curves output rectified current for b250c1000g...b380c1000g fig. 3 - maximum non-repetitive peak forward surge current per diode fig. 4 - typical forward characteristics per diode thermal characteristics (t a = 25 c unless otherwise noted) parameter symbol b40 c1000g b80 c1000g b125 c1000g b250 c1000g b380 c1000g unit typical thermal resistance (1) r ? ja 36 c/w r ? jl 11 ordering information (example) preferred p/n unit weight (g) preferred package code base quantity delivery mode b380c1000g-e4/51 1.12 51 100 plastic bag 20 40 60 8 0 100 120 140 0 0.2 0.4 0.6 0. 8 1.0 1.2 50 to 60 hz resisti v e or ind u cti v e load capaciti v e load ambient temperat u re (?) bridge o u tp u t f u ll wa v e rectified c u rrent a v erage (a) p.c.b. copper pads 0.22 x 0.22" (5.5 x 5.5 mm) 0.375" (9.5 mm) 0 - 10 ? 10 - 100 ? > 100 ? 20 40 60 8 0 100 120 140 0 0.2 0.4 0.6 0. 8 1.0 1.2 a v erage for w ard o u tp u t c u rrent (a) ambient temperat u re (?) capaciti v e load p.c.b. copper pads 0.22 x 0.22" (5.5 x 5.5 mm) 0.375" (9.5 mm) 50 to 60 hz resisti v e or ind u cti v e load 0 - 10 ? 10 - 100 ? > 100 ? 1 10 100 0 10 20 30 40 50 t j = 125 ? 10 ms single half sine-wa v e nu mber of cycles at 50 hz instantaneo u s re v erse c u rrent (?) 0.4 0.6 0. 8 1.0 1.2 1.4 0.01 0.1 1 10 100 instantaneo u s for w ard voltage (v) instantaneo u s for w ard c u rrent (a) t j = 25 ? p u lse width = 300 ? 1 % d u ty cycle
b40c1000g, b80c1000g, b125c 1000g, b250c1000g, b380c1000g www.vishay.com vishay semiconductors revision: 08-jul-13 3 document number: 88500 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 fig. 5 - typical reverse charac teristics per diode fig. 6 - typical junction c apacitance per diode package outline dimensions in inches (millimeters) 0 20 40 60 8 0 100 0.01 0.1 1 10 t j = 100 ? t j = 25 ? percent of rated peak re v erse voltage (%) instantaneo u s re v erse c u rrent (?) 0.1 1 10 100 1 10 100 t j = 25 ? f = 1.0 mhz v sig = 50 mvp-p re v erse voltage (v) j u nction capaci tance (pf) 0.220 (5.6) 0.160 (4.1) 0.3 88 (9. 8 6) 0.34 8 ( 8 . 8 4) 1.0 (25.4) mi n . 0.060 (1.52) 0.020 (0.51) 0.032 (0. 8 1) 0.02 8 (0.71) 0.34 8 ( 8 . 8 4) 0.30 8 (7. 8 2) 0.220 (5.6) 0.1 8 0 (4.6) 0.220 (5.6) 0.1 8 0 (4.6) case style wog
legal disclaimer notice www.vishay.com vishay revision: 02-oct-12 1 document number: 91000 disclaimer all product, product specifications and data are subject to change without notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, vishay), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, repres entation or guarantee regarding the suitabilit y of the products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicable law, vi shay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all i mplied warranties, including warra nties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of products for certain type s of applications are based on vishays knowledge of typical requirements that are often placed on vishay products in generic applications. such statements are not binding statements about the suitability of products for a particular application. it is the customers responsib ility to validate that a particu lar product with the properties descri bed in the product specification is suitable fo r use in a particular application. parameters provided in datasheets and/or specification s may vary in different applications an d performance may vary over time. all operating parameters, including typical pa rameters, must be validated for each customer application by the customers technical experts. product specifications do not expand or otherwise modify vish ays terms and condit ions of purchase, including but not limited to the warranty expressed therein. except as expressly indicate d in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vi shay product could result in personal injury or death. customers using or selling vishay products not expressly indicated for use in such applications do so at their own risk. pleas e contact authorized vishay personnel to ob tain written terms and conditions regarding products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual prope rty rights is granted by this document or by any conduct of vishay. product names and markings noted herein may be trad emarks of their respective owners. material category policy vishay intertechnology, inc. hereby certi fies that all its products that are id entified as rohs-compliant fulfill the definitions and restrictions defined under directive 2011/65/eu of the euro pean parliament and of the council of june 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (eee) - recast, unless otherwis e specified as non-compliant. please note that some vishay documentation may still make reference to rohs directive 2002/95/ ec. we confirm that all the products identified as being compliant to directive 2002 /95/ec conform to directive 2011/65/eu. vishay intertechnology, inc. hereby certifi es that all its products that are identified as ha logen-free follow halogen-free requirements as per jedec js709a stan dards. please note that some vishay documentation may still make reference to the iec 61249-2-21 definition. we co nfirm that all the products identified as being compliant to iec 61249-2-21 conform to jedec js709a standards.
|
